COBB ACCESSPORT V3 FOR 997.2 Turbo / S

SKU: AP3-POR-002 Category:

Supported Vehicles:

  • 2010-2013 Porsche 911 (997.2) MT/PDK Turbo WM
  • 2010-2013 Porsche 911 (997.2) PDK Turbo S WM

Typical Stage1 gains vs stock:

Peak Gains
Max Gains
Stage1 91 +12.56% HP, +9.74% TQ +14.68% HP, +14.96% TQ
Stage1 93 +14.57% HP, +15.80% TQ +19.20% HP, +19.19% TQ

Typical Stage2 gains vs stock:

Peak Gains
Max Gains
Stage2 91 Peak: +20.18% HP, +16.67% TQ Max: +22.94% HP, +22.90% TQ
Stage2 93 Peak: +23.54% HP, +18.18% TQ Max: +25.92% HP, +25.81% TQ

Typical Stage3 gains vs stock:

Peak Gains
Max Gains
Stage3 91 Peak: +24.44% HP, +32.03% TQ Max: +35.63% HP, +34.75% TQ
Stage3 93 Peak: +32.51% HP, +34.41% TQ Max: +39.72% HP, +40.36% TQ
Stage3 100 Peak: +36.77% HP, +36.36% TQ Max: +42.95% HP, +42.29% TQ

 

$1,950.00

- +

Description

The Accessport V3 is the world’s best selling, most flexible ECU upgrade solution for Porsche. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It’s the last engine management solution you’ll ever need.

Throw away your gauges!! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from 1,000s of standard vehicle mounts). Of course, all of the great COBB tuning is included – with enough space for 100 calibrations.

Hardware Requirements:

Stage2 maps require an exhaust system upgrade.

Stage3 maps require aftermarket intercoolers and COBB 3BAR MAP/PUT Sensors in addition to Stage2.

  • NOTE: Stock and OTS maps are not compatible with iPE Exhaust systems.

Fuel Requirements:

Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

  • Maps designated with “100” are for use with 100 octane/102 RON fuel or better
  • Maps designated with “93” are for use with 93 and 94 octane/98 RON fuel or better.
  • Maps designated with “91” are for use with 91 and 92 octane/95 RON fuel or better.
  • Maps designated with “ACN91” are for use with 91 octane fuel found in Arizona, California, and Nevada or better.

Map Version Notes:

Note: Chrono Sport/Overboost mode – Is a Porsche option the momentarily increases boost.
Note: Sport Plus models are equipped with factory Launch Control.

  • Stage 1
    • Exhaust Requirements: Stock.
    • Intake Requirements: Stock air box with stock air filter.
    • Boost Targets: 16psi on Normal Mode, 18psi on Sport Mode (+/-1 PSI)
  • Stage 2
    • Exhaust Requirements: After-Market Exhaust System.
      • High Flow Exhaust (larger diameter piping)
      • High flow catalytic converters.
    • Intake Requirements: Stock air box with stock air filter or upgraded panel filter.
    • Boost Targets: 17psi on normal mode, 20psi on Sport mode. (+/-1 PSI)
  • Stage 3
    • Exhaust Requirements: After-Market Exhaust System.
      • High Flow Exhaust (larger diameter piping)
      • High flow catalytic converters.
    • Intake Requirements: Stock air box with stock air filter or upgraded panel filter.
    • Intercooler Requirements: Aftermarket intercoolers required.
    • Sensor Requirements:  COBB 3BAR MAP/PUT Sensors required.
    • Boost Targets: 20psi (+/-1.5 PSI) 91 octane, 21psi (+/-1.5 PSI) 93 octane, 23psi (+/-1.5 PSI) 100 octane.
      • NOTE: Stock and OTS maps are not compatible with iPE Exhaust systems.

Notes: Stage1, Stage2, and Stage3 maps are conservative and designed to be safe for the designated fuel requirements. Additional performance gains can be achieved through custom tuning efforts.

  • Valet Mode
    • Rev limiter set to 4000 RPM. Boost lowered to half of normal.
  • Anti-Theft Mode
    • This map will not allow the vehicle to start.
  • Stage 0
    • Stock calibration. No changes made at all.

Additional information

Weight 5 oz
Dimensions 12 x 6 x 4 in